63 evox rifa leaded film capacitors rohs complian t 300 0.01C0.22 C40/+110 40/110/56/b 10% for c > 0.1 f, code k. 20% for c 0.1 f, code m enec, ul 1.3 % at 1 khz c 0.33 f 12000 m ? c > 0.33 f 4000 s measured at 500 vdc after 60 s, +23c recommended voltage: 630 vdc tabulated self-resonance frequencies f 0 refer to 5 mm lead lengths. the 100% screening factory test is carried out at 2150 vdc. the voltage level is selected to meet the requirements in applicable equipment standards. all electrical characteristics are checked after the test. pme271e ? emi suppressor, class x1, metallized paper ? 0.01 C 0.22 f , 300 vac, +110 c typical applic ations construction technical data the capacitors are intended for use as interference suppressors in x1 (across-the- line) applications. multi-layer metallized paper. encapsulated and impregnated in self-extinguishing material meeting the requirements of ul 94v-0. rated voltage vac, 50/60hz capacitance range f t emperature range c climatic category iec capacitance tolerance a pprovals dissipation factor tan i nsulation resistance in dc applications r esonance frequency t est voltage between environme ntal te st data v ibration iec 60068-2-6, test fc 3 directions at 2 hour each, no visible damage, no open or short circuit 10 C 500 hz at 0.75 mm or 98 m/s 2 bump iec 60068-2-29, test eb 4000 bumps at 390 m/s 2 no visible damage, no open or short circuit solderability iec 60068-2-20, test ta solder globule method wetting time for d 0.8 < 1 s for d > 0.8 < 1.5 s active fammability en/iec 60384-14:2005 passive fammability en/iec 60384-14:2005 humidity iec 60068-2-3, test ca +40c and 90 C 95% r.h. 56 days ? the highest possible safety regarding active and passive fammability. ? self-extinguishing ul 94v-0 encapsulation material. ? excellent self-healing properties. ensures long life even when subjected to frequent overvoltages. ? good resistance to ionisation due to impregnated dielectric. ? high du/dt capability. ? small dimensions. ? safety approvals for worldwide use. ? the capacitors meet the most stringent iec humidity class, 56 days. ? the impregnated paper ensures excellent stability giving outstanding reliability properties, especially in applications having continuous operation. l h b p 0.5 l ? d d = 0.6 for p = 10.2 0.8 for p = 15.2, 20.3, 22.5 1.0 for p = 25.4 l = standard 30 +5/-0 mm (code r30) option short leads, tolerance +0/-1 mm (standard 6 mm, code r06) other lead lengths on request. suppression versus frequency. typical values. 1 mhz 70 60 50 40 30 20 10 0 f db 5 3 0 10 100 3 200 attenuation 0.0047 f 0.047 f 0.47 f d = 0.6 for p = 10.2 0.8 for p = 15.2, 20.3, 22.5 1.0 for p = 25.4 l = standard: 30 +5/-0 mm (code r30) option 1: short leads, tolerance +0/-1 mm (standard 6 mm, code r06) other lead lengths on request option 2: 30 mm insulated solid leads, ordering code: replace r30 with r300ps in std p/n l h b p 0.5 l ? d d = 0.6 for p = 10.2 0.8 for p = 15.2, 20.3, 22.5 1.0 for p = 25.4 l = standard 30 +5/-0 mm (code r30) option short leads, tolerance +0/-1 mm (standard 6 mm, code r06) other lead lengths on request. suppression versus frequency. typical values. 1 mhz 70 60 50 40 30 20 10 0 f db 5 3 0 10 100 3 200 attenuation 0.0047 f 0.047 f 0.47 f
pme271e ar ticle table 0.010 5.2 10.5 18.5 15.2 500 1000 600 1.7 16 1200 pme271e510mr30 0.015 5.2 10.5 18.5 15.2 500 1000 600 1.7 13 1200 pme271e515mr30 0.022 7.3 13.0 19.0 15.2 400 800 400 3.0 9.8 1200 pme271e522mr30 0.033 7.3 13.0 19.0 15.2 400 800 400 3.0 7.0 1200 pme271e533mr30 0.047 8.5 14.3 18.5 15.2 300 500 350 3.8 6.4 1200 pme271e547mr30 0.068 7.6 14.0 24.0 20.3 250 1500 250 4.5 5.2 600 pme271e568mr30 0.10 11.3 16.5 24.0 20.3 150 1000 180 7.0 4.1 600 pme271e610mr30 0.068 8.0 17.0 27.0 22.5 200 1200 250 5.5 4.7 600 pme271ed5680mr30 0.10 8.0 17.0 27.0 22.5 200 1200 250 5.5 4.1 600 pme271ed6100mr30 0.15 10.0 19.0 27.0 22.5 150 1000 200 5.5 3.2 600 PME271ED6150KR30 0.22 12.0 22.0 27.0 22.5 100 800 5.5 2.5 600 pme271ed6220kr30 0.15 10.6 16.1 30.5 25.4 150 1000 8.6 3.3 400 pme271e615kr30 0.22 12.1 19.0 30.5 25.4 100 800 10.0 2.6 400 pme271e622kr30 quantity per package capaci- max dimensions reel m ax tance in mm r30 r06 taped w eight f o du/dt article code f b h l p pcs pcs pcs g mhz v/s ordering infor mation the article code for the standard part is given in the article table. for other options, see page 11. marking ? rifa ? rifa article code ? rated capacitance ? rated voltage ? x1 ? sh, for self-healing ? climatic category according to iec 60068-1, appendix a ? passive fammability class ? approval marks ? manufacturing code (year, month) approv als certifcation body specifcation enec en/iec 60384-14:2005 ul ul 1283 (u r = 250 vac)
|
